Engineering Support
Community moderator- Following 0 users
- Followed by 0 users
- Votes 10
- Subscriptions 777
Comments
Recent activity by Engineering Support-
Hi Ts, Could you please try the following code: /* * RS232 Series * Pin 1 goes to 5 ~ RX * Pin 2 goes to ground * Pin 3 goes to 5V*/ #define P1 5 #include <SoftwareSerial.h>#define txPin P1 Softwa...
-
Hi Ts, Thank you for following up. It looks like your other post is pending approval so we weren't aware of your post. Could you please the code you are using? Based on the picture R1 and R2 open, ...
-
Hi Chad, I am glad you were able to get it working. Please let us know if you have any other questions
-
Hi Chad, Thank you for trying that. After looking at your code closer it looks like there might be an issue on the command and data functions. Could you try the following functions instead. i have ...
-
Hi Volker, I believe there is communication issues ongoing as we haven't received your email. Could you please forward your email again to us or please call to get in contact.
-
Hi Chad, Thank you for confirming those pins for me. Could you please try the following initialization code? command(0x2A); //function set (extended command set) command(0x71); //functi...
-
Hi Chad, We are currently reviewing your code. Could you please confirm that BS0,BS1,BS2 are all connected to GND since you are interfacing in SPI?
-
Hi Volker, Thank you for your Inquiry. Could you please share the backside picture of the non-confirming display to nhtech@newhavendisplay.com so we can assist you with the next step?
-
Hi, Could you please confirm the display part number you are facing the issue with? The part number and the image you provided don't match the product we have.
-
Unfortunately, we do not have an example code for NHD-4.3-480272FT-CSXP-CTP without a controller board.