
Michael
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Michael-
Michael commented,
All is good. I was able to get the display full up and running. Thanks for the help
-
Michael commented,
Is this possibly a bad display?
-
Michael commented,
Thank you for the quick response. I am now able to read and write the registers. I have configured the proper values for the display listed in this email. The following are the settings. I can cha...
-
Michael commented,
I was able to get the spi to respond by placing a delay after sending FT810_ACTIVE command. The issue I am now facing is writing to the registers. Just after a reset I read 0x302034 and 0x1e0 is re...
-
Michael commented,
Are all grounds connected internally? I do not have all grounds on the 2x10 connector connected.
-
Michael commented,
Yes I am sure the connections are correct because the display responds to commands that operate the backlight
-
Michael created a post,
NHD-4.3-800480FT-CSXP-CTP
Purchased the display listed in the Title to prototype our design. I have the modules connected vi SPI lines to and ESP32S3 devkit, When sending chipId command to the display, there is never a resp...