NHD‐C0220BiZ‐FS(RGB)‐FBW‐3VM - Cable for LED Backlights

wadeh

• December 02, 2016 09:07

Hello,

Given the LED backlight pins are what appears to be a non standard pitch (3mm) and size (~1.45mm), what are my options for a cable to connect to another board?

Sorry if this is a silly question and something I should know.

Thanks!

0

• 

  Paul_B

  • December 02, 2016 10:07

  Evening,
  
  The LCD and backlight pins should be soldered directly onto a thru-hole connection on a PCB (not a cable).
  
  

  0
• 

  wadeh

  • December 02, 2016 13:07

  Understood.  I was planning on mounting the display directly to the front panel of a power supply I'm building.  I thought I would investigate mounting it behind a an aluminum front panel.  This means I either have to use a cable directly from the display or have it mounted to an intermediate board that is then mounted to the front panel.
  
  Thanks for the prompt reply.

  0

Please sign in to leave a comment.