NHD-0.95-9664G flicker and image mirrored.
We're bringing up a small display though the SPI interface. The image appears but there is a really bad flicker. Our microprocessor only sends data when the screen is being updated with new content so this isn't due to a refresh rate. Could this be a power problem?
Short video of the issue: https://www.dropbox.com/scl/fi/lqtxnsk4iwmopsql2x7uo/IMG_5619.MOV?rlkey=yhf9kaq1fobemaajzih4chwp1&dl=0
Also the image is mirrored. Is there a register we can change to flip it or do we need to address this on the microprocessor side?
-
Thank you Dennis for bringing this to our attention,
As we had stated in our email communication, there was a typo in our specification document for the contrast current setting where the register for 0x81,0x82, and 0x83 were stated as 0xB1, 0xB2, and 0xB3.
Please feel free to reach out to us if you need any further support.
0
Please sign in to leave a comment.
Comments
1 comment