What is the connector for the NHD-2.7-12864WDW3 OLED Display?

Will Arden

• February 23, 2023 16:15

Hello,

Very simple question here - apologies if it is obvious. I struggled to find any information on the web regarding the connector on the NHD-2.7-12864WDW3.

I can see this is some sort of flexible FPC/FFC/ZIF style connector - could someone link me to an exact part number or product?

I'd be very appreciative for any help!

Many thanks,

-Will

0

• 

  Engineering Support

  Community moderator

  • February 24, 2023 23:00

  Hi Will,

  Thank you for your inquiry.

  You need to solder a 1x20 pin header to interface with the display.

  

  0
• 

  Will Arden

  • February 27, 2023 09:01

  Hello,

  Taking a closer look, am I correct in assuming that the orange, flexible connector is not accessible by the user (i.e. only the 1x20 pin header is intended for use, with the flexible connector being fixed).

  Thanks

  0
• 

  Engineering Support

  Community moderator

  • February 27, 2023 16:01

  Hi Will,

  The FFC connector you mentioned is used to connect the OLED glass. If you wish to use the FFC connector to interface with the display, please check P/N: NHD-2.7-12864WDW3-M.

  

  0
• 

  Will Arden

  • March 06, 2023 10:02

  Hi,

  Thank you very much for linking me to this part - it looks great.

  May I ask what is the pitch of this 20-way FFC connector?

  Many thanks,

  Will

  0
• 

  Engineering Support

  Community moderator

  • March 06, 2023 15:47

  Hi Will,

  The FFC connector is bottom contact,1.0mm pitch. Please refer to the mechanical drawing page for more information.

  

  0

Please sign in to leave a comment.