DKSB1014B with PIC24FJ256DA210 development board

MD_MN

• November 10, 2014 09:07

Do you have a document that has the LCD initialization values for the DKSB1014B (DigiKey's development board for the 3.5" display)?
Thanks much.

0

• 

  Michael_L

  • November 11, 2014 09:07

  The below link should have everything you need:
  
  http://www.eewiki.net/display/Motley/PIC32+Low-Cost+Controllerless+Graphics+Interface+to+Newhaven+Color+LCD

  0
• 

  MD_MN

  • November 13, 2014 09:07

  I do not see any code examples that will run on the MicroChip PIC24FJ256DA210 Graphics Development Board.
  Do you have any code available for that development board?
  
  Thanks.

  0
• 

  Michael_L

  • November 14, 2014 09:07

  https://www.eewiki.net/display/Motley/Interface+PIC24+to+Newhaven+QVGA+Color+LCD+Touch+Display

  0
• 

  MD_MN

  • April 06, 2015 09:07

  Just getting back to this project. I'm writing the code in assembly. I see the proper settings for the internal registers on the DA210, but I do not see the initialization values that need to be sent to the Newhaven display module via SPI on power-up. Can you tell me what file those are located in?
  
  Thanks much.

  0

Please sign in to leave a comment.