Power Up Sequence for OLED
I'm using the NHD-0.6-6464G Color OLED. I'm driving VCC at 12V and VDD at 3.3V.
To save power, I will turn off the system, but the 12V will remain powered. If I put the display in sleep mode via the SPI command will the power go to the rated 10 uA?
What if VDD goes to zero as I power down? Will the display remain in sleep mode? Do I need to switch the 12V VCC supply as well, and if so, in what sequence for power up and power down?
0
-
This topic is currently being resolved via e-mail.
0
Please sign in to leave a comment.
Comments
1 comment