Ted M.
NHD StaffApplications Engineer at Newhaven Display
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 212
Comments
Recent activity by Ted M.-
Hi Christoph, The Bridgetek FT801 EVE Series Programmer Guide describes a "CMD_ROTATE" command on page 227 that may help answer your question. https://brtchip.com/wp-content/uploads/Support/Docume...
-
Hi Loic75300,Have you tried using a pullup resistor on the miso line?Best Regards,
-
Hi JaDaveIII,Bridgetech shows some examples on using Stencils in a few demo applications they developed.DemoMeterDemo – Bitmaps & Stencil techniques are used to create an interactive knob and meter...
-
Hi Zezem,For PORTH.0 to PORTH.15, DB0 to DB16 is the correct order for 16-bit mode.8-bit mode will only use DB8 to DB15.Unfortunately we do know of a good library to use that supports the PIC32MX b...
-
Hi Norman,The front bezel can be grounded to the metal chassis and isolated from electrical ground to help prevent ground loops in your system.We ESD test this display with the following parameters...
-
Hi Bret,Sorry to hear you are having this issue with the touchscreen.Please email us at nhtech@newhavendisplay.com so we can assist you with your request.Best Regards,
-
Hi Jan,The first link is to a TE Amp connector part # 5-104074-3 or Digikey part # A31853-ND.It is a right angle shrouded and locking pin header connector. Best Regards,
-
Hi Jan,Here are a few options for the NHD-0212WH display with a 1.27mm pitch.https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/5-104074-3/807100https://www.samtec.com/produc...
-
Hi DavePo,This display is rated to withstand an 8kV Air spike and 4kV Contact spike without damage to the display.Depending on your application and product environment, all of the options mentioned...
-
Hi Ingrid,The Focaltech FT6236 datasheet appears to only show registers available in "Working Mode". If there is a register available for setting PERIODACTIVE, then it may only be accessible in "F...