NHD-4.3-480272EF-ASXV#-CTP rotate Display 180°
How can i rotate the Screen? I have found the register name, but witch function do i have to use for this ?
i work with the Arduino IDE and the Arduino library for the FTDI801 from githup.
The Bridgetek FT801 EVE Series Programmer Guide describes a "CMD_ROTATE" command on page 227 that may help answer your question. https://brtchip.com/wp-content/uploads/Support/Documentation/Programming_Guides/ICs/EVE/FT800_Series_Programmer_Guide.pdf
i found the "CMD_ROTATE" command but i think this is not i´m looking for.
on Page 37, there is a register "REG_ROTATE". Maybe this is what i need. I installed the screen upside down and that´s why i need to rotate all not only a matrix or picture.
but how can i write to registers?
thanks for your help
EDIT: i have solved the problem by writing a new function "RotateScreen(void)" in the FT_GC.h file.
thansk a lot,
Please sign in to leave a comment.