Unable to start NHD-3.12-25664UCB2 OLED display.

Comments

1 comment

  • Alee_S

    Hi Ankush,

    It is possible the NHD-3.12-25664UCB2 display may have initialized properly, but since there appears to be no pixel data written to the screen or functions after the initialization, it is hard to determine if this is the case.
    Try running the 0xA5 command in order to turn all pixels on at their highest intensity or creating your own function that can write pixel data to the display's RAM in order to verify if the initialization sequence was run successfully.

    Best,

    0

Please sign in to leave a comment.