• Zach P
    NHD Staff

    Thank you for the interest in our NHD-4.3-480272EF-ATXL display. The display is hard wired internally for 24-bit RGB. If you are looking for a display that uses SPI, I would recommend looking into our EVE2 TFTs as they interface with SPI/D-SPI/Q-SPI.

  • trapper.mcferron
    Ok thank you for the prompt answer!
  • trapper.mcferron

    Hi - I have a couple of follow up questions...

    Can I use DE Mode timing (no SYNC) or am I required to use SYNC-DE mode or SYNC mode (no DE).  The ST7282T2 supports all three but from my understanding it looks like it's hard wired to only do SYNC-DE or SYNC.  Can you confirm or correct me?

    Also on https://www.newhavendisplay.com/specs/NHD-4.3-480272EF-ATXL.pdf it shows the HSYNC pulse width as being 1 DCLK however on the controller datasheet https://www.newhavendisplay.com/resources_dataFiles/datasheets/LCDs/ST7282T2.pdf it shows HSYNC pulse width as min 2 DCLK and typical 4 DCLK.   I assume it should be 4 and the first sheet is incorrect?

    Many thanks in advance!

  • xena
    I'm trying to build an application on  NHD-4.3CTP-SHIELD-L . But the application I'm building will be Portrait mode. And all the examples I have seen so far related to this screen are in landscape mode.
    How can I achieve portrait mode in this screen?

    Thanks in advance


Please sign in to leave a comment.