Low Power LED Backlight for 0216K1Z


1 comment

  • Michael_L

    The resistor on the PCB is in place to currently limit the backlight.  If you wish to use higher voltage, you may either replace this resistor with a larger value, or use an external series resistor on the line going to pin 15. 

    We do not have plans to come out with a version with a 0 ohm resistor there, however, if you are interested in purchasing these displays with a 0 ohm resistor we do offer custom displays and value add services.  To investigate this option further, please email us nhtech@newhavendisplay.com


Please sign in to leave a comment.